Hardware Resources - Hinges - 1/2" Overlay 1 Piece Face Frame Hinge with Overlay Adjustment with Dowels in Nickel

  • Item # HR-118458
  • Model # 3396-000
$0.67 Regular Price $0.74
Add to cart
In Stock
  • Free shipping regardless of order size!
  • Usually ships in 1-2 business days.
  • Estimate shipping date
  • No restocking fee


  • 105? opening angle
  • One piece compact assembly with vertical screw adjustment and horizontal cam adjustment
  • Guaranteed to surpass all ANSI, BHMA & KCMA requirements
  • Cold rolled steel construction with nickel plating
  • #7 x 5/8” pan washer head screw recommended for installation
  • Four mounting prongs securely wrap around the face frame
  • Material: Steel
  • Finish Shown: Nickel

    Screws Not Included: Recommended #7x5/8" pan washer head screw recommeded for isntallation
  • Specs

    Sub Category: 
    Specific Finish: 
    Free Shipping: 
    Base Material: 
    No Restocking Fee: 
    Overall Size of Item: 
    Other part numbers:
    3396-000, 3396-000
    California residents:
    see Proposition 65 information

    Ratings & Reviews

    Add a Review
    1. Buck from , Akron Ohio

      Purchased 150 European hinges and couldn't be happier with their price and performance 

    2. Kaley from Little Rock, AR

      These made a huge difference on our cabinets. We had the old hinges that were visible and mounted to the outsides of the doors and looked awful but with these they're hidden and mount to the inside. We had to go buy a piece for the drill so that we would have the right sized hole for these to fit properly but Home Depot had them. Overall very happy with product. 


    Ask your question here...

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    1. Q: My cabinet doors are 3/4 thick MDF. Will these hinges work with my doors. Model 3396-000
      A: The hinge will accommodate the standard 3/4" inch door. Was this answer useful to you?
    2. Q: How are these hinges installed?
      A: Install the hinge cup and press the hinge cups into the holes. Using a self-centering drill bit, drill pilot holes through the screw holes in the flanges on both sides of the cup.  Remove the mounting plate from the hinge. Align its three screw holes with the intersecting layout lines on the side panel. Using the self-centering bit, drill pilot holes, then attach the plate.  Hook the hinges onto their mounting plates. Press on the bars to snap them in place. Was this answer useful to you?

    Free ShippingLargest SelectionSample PolicySecure ShoppingEasy ReturnsOnline Since 1999

    Recently Viewed (0)
    Shopping Cart ()